With the TM-8000 HD Combo, you can now watch Satellite and Terrestrial channels in one box! Furthermore, it has 2x Smart Card Readers & 2x Common Interface (CI) slots.

Not leaving the Standard Definition (SD) channels behind, we’ve developed a built-in hardware Upscaler to improve the picture quality of Standard Definition (SD) channels via the HDMI output.

You can record onto a 2.5" HDD which is easily removeable from the front panel to make extracting files from your HDD even easier. You can also use a USB Hard Disk Drive (HDD) to record all your favourite channels, listen to your music and watch a slideshow of your photos.

The luxurious Vacuum Fluorescent Display (VFD) front panel displays: channel names, recording status, playback status...and more (display may vary to the above).

Instead of connecting your Satellite Receiver to a PC by an RS-232 cable to download software, you can now download software at lightning speeds, taking only seconds compared to minutes by RS-232 on your PC. You can also download channel lists by USB and also upload them as a backup.

The satellite receiver has a channel memory of 20,000 channels therefore you will never run out of space to store your TV & Radio channels.

For searching, there’s a hardware blind search tuner which is much more accurate than software blind search. The satellite tuner is super sensitive to pick up weak signals and weak transponders.

To watch the same channel on another TV, there’s an RF modulator at the rear of the satellite receiver, so you can watch all your channels in your bedroom (requires a cable to be connected from the RF modulator to the second TV).

It’s even Eco-friendly with 1W standby power consumption.

For further information about this product, please click on the Features and Specifications tabs.

**not all 3D formats are compatible & requires a 3D TV