DESCRIPTION of 9 x 8 Satellite & Terrestrial Multiswitch

• REVEZ 9 x 8 Multiswitch
• Inputs: 9
  • Horizontal High (22 KHz)
  • Horizontal low
  • Vertical High  (22 KHz)
  • Vertical Low
  • Terrestrial
• Outputs: 8 satellite & terrestrial feeds

Frequencies:

• Frequency Range: 47 ~ 2200 MHz Attenuation: 0 dB (Sat), 16 dB (Terr) Isolation: 30 dB (Sat)  Output Level (Terr): max. 95 dBµV Output Level (Sat): max. 95 dBµV Power Supply: 230V 50Hz DC Voltage: 13V / 18V DC Power (LNB): 1A (max) DC Power (12V): Ʃ 300mA (max)

Note: Always used with Quattro LNB

Used extensively in

• Hotels
• Apartment blocks
• Retirement villages

HOW the 9 x 8 Satellite & Terrestrial MultiSwitch Works

Quattro Vs Traditional LNB

• Traditional LNB which simply feeds a Satellite receiver from each output
• Quattro LNB splits the satellite signal into
  • Vertical (High & Low)
  • Horizontal (High & Low)
• This allows the signal to to feed to an infinite amount of Satellite points

How a Quattro LNB and Multiswitch work

• Used in conjunction with a Quattro LNB (normally mounted on an 80cm dish) whose 4 outputs are broken into
  • Vertical (High & Low)
  • Horizontal (High & Low)
• Multiswitch inputs:
  • Satellite: 8 from 2x satellite quattro LNBs
  • Terresttial: a single feed covering full VHF / UHF Spectrum 
• Multiswitch range:
  • Outputs: 8, 16 or 32 outputs to Satellite receivers
• At the TV Point:
  • Use a Faceplate to split the signal into Satellite and terrestrial