VHK6 – Hybrid LNB 6-output (2 x Wideband, 4 x Quad)
- Finished in grey
- Supplied with a SkyTM compatible bracket
- Built-in spirit level
Used for Sky Q systems where regular free to air / Sky boxes are also in use from the same satellite dish
Wideband Technical Specification | |
Input Frequency | 10.7 ~ 12.75 GHz |
Output frequency | Vertical: 290 ~ 2340 MHz |
Horizontal: 290 ~ 2340 MHz | |
L.O. frequencies | 10.41 GHz |
L.O. Stability | +/-0.5 MHz (max) @ Room Temp. +/-1 MHz (max) @ -40°C ~ +60°C |
L.O. Phase Noise | -50dBc/Hz @ 1kHz (max.) -75dBc/Hz @ 10kHz (max.) -100dBc/Hz @ 100kHz (max.) |
Noise Figure | 0.1 dB (typ.) |
Conversion Gain | 50 dB (min) / 60 dB (max) |
Gain Flatness @ 26MHz | +/-0.5dB (typ.) |
Gain Variation | 7dB (max.) @ full band |
Cross Polar Isolation | 25 dB (typ.) |
Image Rejection | 40 dB (min) |
Current Consumption | 0.85W (max.) (70mA @ +12V DC) |
Power Voltage | 9 – 19V DC |
Connector Type | 75 female F-connector |
Output Spurious | <-60dBm |
Operating Temp. | -40’C ~ +60’C |
RED Compliance | EN 303 372-1 |
Legacy Technical Specification | |
Input frequency | low band: 10.7 ~ 11.7 GHz |
high band: 11.7 ~ 12.75 GHz | |
Feedhorn – Linear | Optimised for offset dish |
Output Frequency | low band: 950 ~ 1950 MHz |
high band: 1100 ~ 2150 MHz | |
Output 1,2,3,4 VSWR | Ratio 2.0:1 (typ.), 2.5:1 (max.) |
L.O. frequencies | 9.75 / 10.6 GHz |
L.O. Stability | 0.5 ~ 1.0 MHz |
L.O. Phase Noise | -55dBc/Hz @ 1kHz (max.) -75dBc/Hz @ 10kHz (max.) -90dBc/Hz @ 100kHz (max.) |
Conversion Gain | 56 ~ 63 dB @ 25ºC 54 ~ 60 dB @ -40ºC ~ 60ºC |
Gain Flatness Over Full Band | 3 dB P-P (typ.), 5 dB P-P (typ.) |
Gain Flatness @ 26MHz @ 300MHz | +/- 0.5 dB P-P (typ.) +/- 4 dB P-P (typ.) |
1.7GHz | -50 dB (typ.) -47 dB (max.) |
Noise Figure | 0.3 dB (typ.), 1.0 dB (max.) |
Cross Polar Isolation | 18 dB (min.), 20 dB (typ.) |
Image Rejection | 37 dB (min), 40 dB (typ.) |
Current Consumption | 120mA (typ.), 140mA (max.) |
Operating Voltage & |
Vertical 11.5 – 14.5 VDC Horizontal 15.5 – 19 VDC Low-Band 0 KHz High-Band 18 – 26 KHz
|
Connector Type | 75 female F-connector |
Operating Temp. | -40’C ~ +60’C |
RED Compliance | EN 303 372-1 |