PowerWalker Basic VI 1000 SB Line Interactive UPS, 1kVA / 600W
The PowerWalker Basic VI 650 / 850 / 1000 SB series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S
| General Features | |
| Type | Line-Interactive (VI) |
| Phases (IN-OUT) | 1-1 |
| Form Factor | Tower |
| Power Capacity | 1000VA / 600W |
| Output Power Factor | 0.60 |
| Input | |
| Input Voltage Range | 162-290 VAC |
| Frequency Range | 50Hz or 60Hz (self-adaptive) |
| Output | |
| Waveform | Simulated Sine Wave |
| Nominal Output Voltage | 230 VAC |
| Frequency (Battery Mode) | ±0.05Hz |
| Input & Output Connectors | |
| Input Connector | UK |
| Output Type | Type G |
| Type G (BS 1363) | 3 |
| Technical Details | |
| LINE Mode Efficiency [%] (Full Load) | 96.5 |
| Transfer Time (AC / Line Mode to Battery Mode) [ms] | 4ms |
| Additional Features | Circuit Breaker Reset, HID – Human Interface Device, AVR – Automatic Voltage Regulator, Cold-Start Function |
| IEC 62040-3 classification | VI-SY-333 |
| Batteries and Autonomy | |
| Batteries | 2x 12.0V/5.0Ah |
| DC Voltage | 2x 12.0V |
| Recharge Time | 8h to 90% |
| Full Load Backup Time [min] | 1.0 |
| Half Load Backup Time [min] | 7.0 |
| Charger | 0.7A |
| Communication | |
| Communication | USB Type B – for Monitoring Software |
| Software | PowerMaster |
| Environment | |
| Noise Level | < 30dB |
| Fan Logic | No fan |
| Temperature | 0°C – 40°C |
| Humidity | 0% – 90% RH (non-condensing) |
| IP | IP 20 |