Teltonika RUT200 Industrial 4G/LTE WiFi Router

 

RUT200 is a compact industrial cellular router that provides reliable, mission-critical connectivity in rigorous conditions common in industries like automation, transportation, and manufacturing. This model is equipped with 4G LTE, Wi-Fi, and two Ethernet ports, making it ideal for quickly setting up primary and backup connectivity with remote management capabilities.

 

Features:

 

CONNECTIVITY: 4G/LTE (Cat 4), 3G, 2G

WI-FI: Wireless Access Point with Hotspot functionality

WAN FAILOVER: Automatic switching to available Backup connection

RMS: For remote management, access & VPN services

 

Specifications:

 

MOBILE

• Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

• Status

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

• SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

• USSD

Supports sending and reading Unstructured Supplementary Service Data messages

• Black/White list

Operator black/white list

• Multiple PDN

Possibility to use different PDNs for multiple network access and services

• Band management

Band lock, Used band status display

• APN

Auto APN

• Bridge

Direct connection (bridge) between mobile ISP and device on LAN

• Passthrough

Router assigns its mobile WAN IP address to another device on LAN

WIRELESS

• Wireless mode

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

• WiFi security

WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

• SSID/ESSID

SSID stealth mode and access control based on MAC address

• WiFi users

Up to 50 simultaneous connections

• Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET

• WAN

1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

• LAN

1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

• Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

• Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

• VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall

Port forward, traffic rules, custom rules

• DHCP

Static and dynamic IP allocation, DHCP Relay, Relayd

• QoS / Smart Queue Management (SQM)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS

Supported >25 service providers, others can be configured manually

• Network backup

WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing

Balance Internet traffic over multiple WAN connections

• Hotspot

Internal/external Radius server, captive portal, built in customizable landing page

• SSHFS

Possibility to mount remote file system via SSH protocol

SECURITY

• Authentication

Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

• Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

• Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

• VLAN

Port and tag based VLAN separation

• Mobile quota control

Custom data limits for SIM card

• WEB filter

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

• Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN

Multiple clients and a server can run simultaneously, 27 encryption methods

• OpenVPN Encryption

DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,

BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

• IPsec

IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

• GRE

GRE tunnel, GRE tunnel over IPsec support

• PPTP, L2TP

Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

• Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

• DMVPN

Method of building scalable IPsec VPNs

• SSTP

SSTP client instance support

• ZeroTier

ZeroTier VPN client support

• WireGuard

WireGuard VPN client and server support

• Tinc

Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

MODBUS TCP SLAVE

• ID range

Respond to one ID in range [1;255] or any

• Allow Remote Access

Allow access through WAN

• Custom registers

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

• Supported functions

01, 02, 03, 04, 05, 06, 15, 16

• Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

• Protocol

HTTP(S), MQTT, Azure MQTT

MQTT GATEWAY

• MQTT Gateway

Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

• Supported modes

TCP Master, DNP3 Outstation

MONITORING & MANAGEMENT

• WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

• FOTA

Firmware update from server, automatic notification

• SSH

SSH (v1, v2)

• SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

• Call

Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

• TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

• MQTT

MQTT Broker, MQTT publisher

• SNMP

SNMP (v1, v2, v3), SNMP Trap

• JSON-RPC

Management API over HTTP/HTTPS

• MODBUS

MODBUS TCP status/control

• RMS

Teltonika Remote Management System (RMS)

IOT PLATFORMS

• Cloud of Things

Allows monitoring of: Device data, Mobile data, Network info, Availability

• ThingWorx

Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

• Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

• Azure IoT Hub

Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

• CPU

Mediatek MIPS 24Kc 580 MHz

• RAM

128 MB, DDR2

• FLASH storage

16 MB, SPI Flash

FIRMWARE / CONFIGURATION

• WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup

• FOTA

Update FW

• RMS

Update FW/configuration for multiple devices at once

• Keep settings

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

• Operating system

RutOS (OpenWrt based Linux OS)

• Supported languages

Busybox shell, Lua, C, C++

• Development tools

SDK package with build environment provided

INPUT / OUTPUT

• Input

1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

• Output

1 x Digital Output, Open collector output, max output 30 V, 300 mA

• Events

Email, RMS, SMS

• I/O juggler

Allows to set certain I/O conditions to initiate event

POWER

• Connector

4-pin industrial DC power socket

• Input voltage range

9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

• PoE (passive)

Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC

• Power consumption

< 6.5 W Max

PHYSICAL INTERFACES

• Ethernet

2 x RJ45 ports, 10/100 Mbps

• I/O’s

1 x Digital Input, 1 x Digital Output on 4-pin power connector

• Status LEDs

3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

• SIM

1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder

• Power

1 x 4-pin power connector

• Antennas
   

2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors

• Reset

Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

• Casing material

Aluminium housing, plastic panels

• Dimensions (W x H x D)

83 x 25 x 74 mm

• Weight

125 g

• Mounting options

Bottom and sideways DIN rail mounting slots

OPERATING ENVIRONMENT

• Operating temperature

-40 °C to 75 °C

• Operating humidity

10% to 90% non-condensing

• Ingress Protection Rating

IP30

REGULATORY & TYPE APPROVALS

• Regulatory

CB

SAFETY

• Standards 

IEC 62368-1:2018 (CB Scheme)